Primary Navigation

How To Install Training Wheels

Riderz Street TrainerzThis week at the local thrift store, I found a deal on a couple of bikes for my girls. It was easy to tell that the bikes at one point had come prefabricated with designer training wheels and hardware. The only remnant of these training wheels were the leftover hardware still on the bike. I decided to pick up a set of training wheels, and bought the least expensive pair for $9. I will be detailing the instructions on how to install these training wheels made by Riderz.

 

 

 

 

Needed Tools

 

 

TOOLS YOU WILL NEED

1) 15mm Wrench

2) Adjustable Wrench

 

 

 

 

 

Hardware Included

Training Wheel Hardware

Training Wheel Hardware

 

2- Small Bracket Brace Plates

4- Nuts

4- Washers

2- Serrated Washers

2- Shoulder Bolts

2- Vertical Brackets

2- Wheels

 

 

 

Installation Instructions:

Attaching Wheel to Vertical Bracket

Assemble pieces on shoulder bolt in the following order:-Wheel – Flat Washer- Nut – Vertical Bracket, Flat Washer, Serrated Washer – Nut

Wheel Assembly

 

 

 

 

 

 

 

 

 

 

Attaching Assembled Training Wheel and Bracket to Bicycle

1. Remove axle nit and washer from bicycle axle.

Axle washer and nut removed

 

 

 

 

 

 

 

 

2. Place Bracket Brace Plate over bike axle by inserting the tab into the open space of the bike frame.

 

 

 

 

 

 

 

 

 

 

3. Place assembled training wheel onto bracket brace plate and adjust bracket height.

No nut between Bracket Plate and Vertical Bracket

 

 

**THIS IS INCORRECT**

 

 

 

 

 

4. Replace axel washer and nut, and tighten securely.

 

 

 

 

 

 

 

 

 

 

, , ,

14 Responses to How To Install Training Wheels

  1. Ronnie Jones March 8, 2014 at 1:02 pm #

    great instructions thanks I would have never got that on without you

  2. Firsttimetrainingwheeler April 23, 2014 at 2:19 pm #

    Thank you for the tutorial!! I could not get it for the life of me. Now my little guy can ride!!! Thanks again.

  3. Melinda September 14, 2014 at 3:51 pm #

    I am still having trouble with the wheel. I can get wheel screwed & tightened, but then it does not turn/spin, when I loosen it so it can turn/spin, the wheels fall off after a few seconds of riding. How can I get that happy medium where it is securely tightened, but still spins??

  4. minh December 25, 2014 at 10:50 am #

    It doesn’t work first of all if you look at the picture of the parts the screw doesn’t have threading all the way down But the assembly picture where it tells you the order of the nuts washer and lock washer and bracket and Axel the screw on that picture has threads on the screw

  5. Alex April 19, 2015 at 5:10 pm #

    Thank you so much!i had it wrong twice until I decided to search the web and found your post! Little one is ready to ride!

  6. eric macdonald June 1, 2015 at 10:57 am #

    hey thanks a lot
    don’t know if its just mine
    but literally no instruction in my riderz
    couldn’t figure out the placement of the serated washer

    know they re dads out there
    that appreciate it..
    and four year old girls..
    thanks again
    eric

  7. Melissa June 13, 2015 at 3:48 pm #

    First of all the shoulder bolts they give you doesn’t have the threading all the way down unless you go buy shoulder bolts that do so without those this doesn’t work.

  8. Paul October 3, 2015 at 7:34 am #

    My problem is that the axle is not long enough to put the bolt back on when I add the training wheel and bracket. What option do I have? It’s for my granddaughters birthday today.

  9. marcelino February 24, 2016 at 10:14 am #

    It works, but not as shown on the picture. There is instructions on the inside of the cardboard attached to the plastic bag. Put the washers and nuts in the right order and you’ll make it work. The wheel ends up being secure and free to spin.

  10. Anthony February 29, 2016 at 7:39 pm #

    Thank you for doing this as it is wry helpful as the kit has no instructions. Great instructions and pictures from you. Couldn’t have done it with out this!!

  11. Brad March 25, 2016 at 11:41 am #

    You are truly heroic. My kids lost the instructions while zealously tearing open the package to help me install these training wheels. An hour later I found this. Thank you

  12. Jay July 24, 2016 at 12:35 pm #

    USE THIS!!

    thanks so much- these were great. There were no instructions in the set we bought so this was very helpful!

    Also- make sure the training wheels are the level of the tires. If the bike floats the brakes won’t work!!

  13. mike August 21, 2016 at 10:25 am #

    you’re instructions are not very good. not detailed enough.

  14. Mariana Stoneburg April 30, 2017 at 12:29 pm #

    My granddaughter and I love you. We were struggling with these, and you had everything explained beautifully. Thanks!!!

Leave a Reply

Part of the JP Squared Blog Network

CLOSE
CLOSE